
MCC-STEDI-XPRO
Stedi Type-X Pro Led Driving Lights 8.5Inch - SKU MCC-STEDI-XPRO
$699.00
ALWAYS ON THE CUTTING EDGE.
Cutting edge performance starts with cutting edge LED technology. To achieve genuine category-leading performance our Type-X Pro is equipped with 37 x Oslon High-Flux LEDs, selected for having the #1 highest lumen density per mm2 of any other comparable LED on the market. Compared to the two other leading spotlights brands similar offerings, the LEDs used in Type-X PRO have + 23% and +42% higher lumen density per mm2 in comparison. The net result is higher net light volume and unrivaled beam throw.
A WOLF IN WOLFS CLOTHING
The hard-coated optical grade lens shares the same DNA as ballistic glass making it virtually indestructible. A UV stabiliser has also been added to ensure our lenses truly withstand the test of time with no discolouring or UV degradation. This has allowed us to do away with any secondary lens covers or filters which are known to significantly reduce light transmission.
ICONIC PERFORMANCE
Using the latest optic simulation modeling, the reflector geometry was tweaked over and over again to achieve a highly usable beam pattern. No doubt the attention grabber is the unrelenting beam distance of 1,155m (tested in pairs, combo beam), however, the real strength of our Type-X PRO is in mid to long light distribution that really sets it apart.
Our key focus was on driver confidence, by increasing the beam throw the driver has longer analysis time. We maximised driver comfort by smoothing out the beam eliminating shadows. We reduced the light wasted in unimportant zones like treetops and immediately in front of the vehicle. The result is a homogeneous, unrelenting beam that will support you well in any adventure.
Unlike our competitors, each Type-X PRO lamp has 6 built-in flood reflectors for improved light distribution out into the road shoulders. The built-in wide-beam reflector eliminates the need to add any wide beam covers, which are not only less efficient at distributing light, covers also withhold valuable light transmission.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
We’re serious about Quality
Built with superior quality and cutting-edge innovation, our 4WD equipment is manufactured using the latest technology and thoroughly tested under extreme conditions, ensuring reliability and performance you can trust.
ADR COMPLIANT
BLACK POWDER COATED
ZINC PHOSPHATE PRIMER
3-6MM HIGH QUALITY STEEL
HIGHLIFT JACK POINT
UNDER PROTECTION PLATES
AERIAL MOUNTS
POLYURETHANE BUMPER PROTECTION
RECOVERY POINTS COMPATIBLE
LED FOGLIGHT AVAILABLE
SIDE RAIL / SCRUB BARS COMPATIBLE
WINCH COMPATIBLE
ADR COMPLIANT
BLACK POWDER COATED
ZINC PHOSPHATE PRIMER
3-6MM HIGH QUALITY STEEL
HIGHLIFT JACK POINT
UNDER PROTECTION PLATES
World leading machinery
Our state-of-the-art manufacturing plant uses the latest in technology and design to produce some of the best 4WD equipment in the world.
Our products are backed by decades of technical manufacturing expertise and ongoing R&D.
Everything we manufacture has been thoroughly tested under the most extreme of conditions, giving you absolute confidence in their quality.

Refined safety and functionality
MCC bull bars provide protection against animal collisions and brush, and allows for mounting of other accessories, such as lights, winches, and antennas, making them essential for travel in rural areas and for offroading adventures.

Built to quality standards
All our bull bars comply with Australian Design Standards, including safe deployment of airbags for better pedestrian and driver safety. Our bull bars have been vigorously tested under extreme conditions to ensure their safety and performance.

Aesthetics
Our bull bars are built with a focus on design to enhance the performance and look of your vehicle. All components are constructed from high-quality steel and available in a range of powder coating finishes.

Technical Details
Technical Details
Compare falcon - all time classic

MCC 707-02
FALCON BAR A-FRAME
Lorem ipsum dolor sit amet consectetur. Sagittis vitae facilisis risus at praesent gravida vitae.
- malesuada est et non ultrices congue
- pellentesque volutpat.
- Iaculis tellus adipiscing odio mauris
Key difference
- malesuada est et non ultrices congue
- malesuada est et non ultrices congue

MCC 707-01
Falcon Bar Stainless Steel
Lorem ipsum dolor sit amet consectetur. Sagittis vitae facilisis risus at praesent gravida vitae.
- malesuada est et non ultrices congue
- pellentesque volutpat.
- Iaculis tellus adipiscing odio mauris
Key difference
- malesuada est et non ultrices congue
- malesuada est et non ultrices congue
Can’t find the answer you’re looking for? We’ve got you covered! Our Customer Care team is happy to assist you and strives to reply to all emails within 48 business hours. Contact us through live chat, call us at (+61) 3 8401 3691, or drop us a line at sales@mcc4x4.com.
Operating Hours
Don’t see the answer You’re Looking for? See All FAQs
Do MCC bull bars include LED lights?
Yes, many MCC bull bars come with integrated LED park and indicator lights, offering improved visibility and modern styling as part of the standard package.
Is professional installation required for MCC bull bars?
While confident DIYers can install the bull bar using the provided fitting instructions, professional installation is recommended to ensure proper alignment, safety, and warranty compliance.
Do MCC bull bars support winch installation?
Yes, MCC bull bars are fully winch-compatible, with a built-in winch cradle and pre-drilled mounting holes to accommodate a range of popular winch models.
Can I use MCC bull bar bracket/winch cradle with a different brand of bull bar?
No, our brackets are made specifically for our bull bars and vice versa.
What is the tow capacity rating of our rear bars?
3.5 tons
Is it cheaper to buy the arm and rear carrier bar separately on the single arm set up?
In terms of price, purchasing the arm and rear carrier bar separately may save you around $100.
However, you'll get significantly more value when you choose the Rear Wheel Carrier Package, which includes two removable arms. This package is designed for greater versatility, allowing you to mount a spare wheel and jerry cans holder
It's a better long-term investment for those who need full functionality and flexibility in their setup.

